Top posts

• Delayed Remote Control Hot Water Pump at the Basement

  14 November 2013 ( #time delayed, #long range, #wireless remote control, #hot water circulator pump )

  Question from customer: I want to use one device to turn on a hot-water circulator in my home for 15 minutes & then have it automatically turn off. I live in a 2 story wood home & the hot-water circulator is in the basement - maybe a distance of about...

• Actuator Motor Remote Controlling

  01 September 2014 ( #motor remote control )

  Question from customer: I’m looking for an RC transmitter and receiver to operate the 4″ actuator a distance of 200ft for steering a lawnmower. Any suggestions? Answer: We recommend the model of 500m/1500ft RF motor controller (S1FC-DC09/12/24 & CV-4-2)....

• Remote Control Linear Actuator Motor

  02 July 2014

  Question from customer: “I need a linear actuator to hook to my home automation. I control my large saltwater tank via this system. I want to achieve: Small actuator on cabinet door When I turn an outlet on that it’s plugged into actuator opens Ability...

• Motor Controller Remote Controls Electric Shutter

  15 May 2014

  Overview: I want to buy a radio system for my 9 shutters (220 V), wireless control, 9 receivers and 1 remote, climb or descend in all my components by one remote. Solution: We recommend ac power output controller (S1FM-AC220), which is designed for controlling...

• How to make infrared sensor motion activated lamp?

  25 December 2012 ( #infrared lamp, #infrared sensor lamp, #motion activated lamp, #wireless motion detector, #rf receiver, #lamp automatic control )

  An infrared sensor motion activated lamp is a security and energy saving feature which can be installed into dark home, hall, corridor or staircase. The lamp works by detecting motion in the room. Within the area of detection, the motion detector will...

• How to Remote Control AC Lamp with Wireless Wall Switch and Receiver

  22 July 2014

  We made a remote control kit which consists of awall-mounted switch and a remote receiver (S1X-AC220&HR-1). When we use ordinary switch to switch home appliances off and on, we should do some wiring for home appliances, some time it is very complicated...

• 1CH 220V Power Output Remote Controller Sets Switch 5 Pendant Lights Off and On Individually

  16 April 2014

  Question from Customer: I am looking for 5 remote controls to control 5 individual lights in living room. Do you have any recommendations? Answer: We recommend the model of 1 channel 220V power output controller switch (S1X-AC220+2C-2), you can buy 5...

• Wireless Distant Control Activates 4 Spotlights On and Off

  31 May 2013 ( #12vdc, #4 channel, #LED work spotlights, #multi-mode, #remote control, #toggle mode )

  I am looking for a wireless control that I can use to 12V 4 LED work spotlights on my small truck. I want to know if it can work. I found this kind of toggle remote controller with dc 12V 4 channel to activate my 4 spotlights on the truck. It includes...

• Make A Simple Wireless Control Security System

  22 March 2013 ( #wireless remote, #wireless control, #security system, #receiver, #long distance )

  We usually install security system to help us to monitor the farm. Use infrared motion sensor and lamp to make a simple security system, for instance. It’s easy to wire and operate. But if the infrared motion sensor is installed at the door of the farm...

• 20amps Boat Dragging Winch Remote Controlling

  03 March 2014 ( #winch motor, #20amps, #500m, #contactor motor starter, #momentary mode, #220V )

  Question from customer: Hi, I am looking for a 110 volt remote control for a winch that pulls my boat from the water into my boat house. Requirements: 120 volt 20 amps max Momentary switches Do you have a kit that meets these requirements? Answer: First,...

• NO/NC Contact Remote Control Kit for Four Devices

  30 June 2014

  Question from customer: "I need to operate 3 or 4 devices separately with 2 momentary functions per each. I need one transmitter to function from approx. 100 - 500m - to work all devices. The devices will operate on a 12volt DC system." Answer: We recommend...

• AC110~220V Power Activated Remote Controller for Electric Appliance

  24 December 2013 ( #wireless remote control, #long range, #3000ft, #ac direct power output, #electric appliance, #lamp )

  Question from customer: I want to turn an appliance off and on in a room in my house 120ft from the room with the transmitter. Does the appliance plug into the receiver and the receiver plug into an outlet? Answer: We recommend 3000ft long range ac direct...

• RF Wireless Magnetic Sensor for Rolling Door

  19 August 2014

  Roller shutters or rolling doors have many applications, including applications for vans, garages, kitchens, schools and warehouse. The door is raised to open it and lowered to close it. Both roller shutter and rolling doors provide protection against...

• Published from Overblog

  25 January 2014 ( #6V, #1 channel, #time delayed, #lamp, #100m, #wireless remote control )

  This 1 channel dc RF remote control switch features in controlling relay off time delay. Delay time can be customized according to actual requirement. It is widely applied to control lights, motors, fans, electrically operated doors / locks / windows...

• 100m 30A Remote Controller for Electric Equipment

  19 February 2014 ( #1 channel, #30ampere, #100m, #high power, #normally open &closed, #toggle, #momentary, #latched )

  Question from customer: I am looking for an RF switch and transmitter where the switch has a coil voltage up to 12v and the switch terminal can handle 240v and 25 amps. Do you have anything like this? Answer: We recommend 1 channel high power remote controller...

• How Do 8 Transmitters Remote Control One Receiver

  30 December 2013 ( #wireless remote control, #normally open-closed contact, #2000m, #toggle mode, #one channel )

  Question from customer: I want to install a set of wireless remote controls, include 8 transmitters in 8 different places (max. 500 m) and one receiver in a specific location. The transmitter transmits a wireless signal to control a closed contact. Answer:...

• 110V~220V Lamps are Controlled by Direct Output Remote Controller

  18 December 2013 ( #wireless remote control, #1 channel, #3ampere, #100M, #toggle mode, #controlling 2 lamps on-off )

  When you want to remote control one more AC devices, you may think about 2 channel remote receiver. This kind of toggle 2 channel remote switch (S2T-AC110~240V + C-1) may be suitable for you. It is activated by AC110V~240V power supply. The maximum current...

• 2000M 1CH RF Remote Control systems with Antennas for 2 Different Voltage's Sirens

  26 August 2013 ( #long range, #ac 240V power direct output, #dc12V power direct output, #one-to-many system, #three working modes, #2000m )

  Question from Customer: Hello, I would like some help to decide on what system to choose. We have a siren in a building 750m away that we would like to trigger, it is 240v. I would also like to use the same remote to activate a 12v siren 1.2km away. Is...

• Motion Detector

  24 May 2013 ( #applcation, #detector, #infrared sensor, #motion, #wireless )

  Someone wanted to find the best solution for wireless motion detection system. He just wanted 6 transmitters to be 6 motion sensors. And a 6-channel receiver can identifies each transmitter after activation. That system is to run on 12V. Wireless Infrared...

• 10ampere 100M Remote Control for LED Lamp

  02 January 2014 ( #1 channel, #ac power output, #wireless remote control, #100m, #control lamp through transformer )

  Question from customer: I want to put a 220v Transceiver to turn on / off the power of a transformer of led lighting (to avoid the transformer is always on), this will make me a remote control switch. I want a basic on / off function product. Answer:...

• Toggle Direct AC Power Output Remote Controller Connection and Application

  16 December 2013 ( #wireless remote control, #1 channel, #3ampere, #100M, #retrofitted receiver )

  The 1 channel RF remote control operates in AC110V ~220V and 315/433MHz. Through retrofitting, this kind of remote control made a little changes compared with the original remote. Two kinds of receiver style, one is AC 110V (AC 100~120V), widely used...

• RF Momentary Remote Control to Light Fireworks

  19 December 2012 ( #light fireworks, #fireworks ignition, #rf remote control, #momentary remote control, #transmitter, #receiver )

  Do you want to make safe and easy remote control fireworks ignition for your holiday celebrations? That means no longer do you need to hand light the fireworks personally. And you can stand back and watch your display with your guests and enjoy the show!...

• 1 Channel AC Output Remote Controller for Pharmacy Lighted Signs

  03 June 2013 ( #4 receivers, #long range remote, #long range remote transmitter, #one to many series, #One Transmitter, #pharmacy lighted sign )

  One man has 4 small lighted exterior signs around a pharmacy building and would like to control all four signs to go on and off by a simple RF system switch. He is wondering whether this is possible or not? Surely, he can order 4 receivers for light control...

• How TV sliding panel mechanism can be controlled by remote controller?

  04 December 2012 ( #tv sliding panel mechanism, #rf remote control, #motor remote controller )

  The sliding panel mechanism can help the flat-panel TV blend in better with the wall surface. Instead of covering the panel with canvas artwork, the sliding panel mechanism conceals the TV with a panel that matches the existing wall surface. It offers...

• How to Use GSM Smart Power Socket Switch Device On and Off Directly

  10 February 2014 ( #tri-Frequency, #tri-Band, #GSM network, #remote control, #smart power socket, #SMS control, #telephone and manual control, #power-off memory function, #state checking function )

  This tri-frequency/tri-band GSM smart power socket has manual control, state checking function and power-off memory function other than phone call remote control and SMS remote control. Manual Control Press buttons SW1/SW2/SW3 on the socket directly to...