What if all your home appliances are controlled by remote? Maybe you will become lazy. But it seems fantastic, isn't it?
Question from customer: I am in Australia and here we have Live-Re and Neutral-Black and Earth-Green. I wish to wire a drowned pump to your radio controller then back to the consumer mains. Please advise if wiring would be Mains Live Red to Controller...
This 1 channel dc RF remote control switch features in controlling relay off time delay. Delay time can be customized according to actual requirement. It is widely applied to control lights, motors, fans, electrically operated doors / locks / windows...
Question from customer: I am in need of a controller. I will be using this to control a winch on my pickup and some lights. So I need one button momentary for line in, one button momentary for line out, and 2 buttons on/off for lights. Answer: 4 Relay...
Question from customer: When the tank is empty my float switch makes contact and stays in this mode till the tank is full. What I need is for the transmitter to activate the receiver and hold it in the on position till the float switch interrupts the...
Question from customer: I want to put a 220v Transceiver to turn on / off the power of a transformer of led lighting (to avoid the transformer is always on), this will make me a remote control switch. I want a basic on / off function product. Answer:...
Question from customer: I want to install a set of wireless remote controls, include 8 transmitters in 8 different places (max. 500 m) and one receiver in a specific location. The transmitter transmits a wireless signal to control a closed contact. Answer:...
Question from customer: I want to turn an appliance off and on in a room in my house 120ft from the room with the transmitter. Does the appliance plug into the receiver and the receiver plug into an outlet? Answer: We recommend 3000ft long range ac direct...
When you want to remote control one more AC devices, you may think about 2 channel remote receiver. This kind of toggle 2 channel remote switch (S2T-AC110~240V + C-1) may be suitable for you. It is activated by AC110V~240V power supply. The maximum current...
The 1 channel RF remote control operates in AC110V ~220V and 315/433MHz. Through retrofitting, this kind of remote control made a little changes compared with the original remote. Two kinds of receiver style, one is AC 110V (AC 100~120V), widely used...