How to Use GSM Smart Power Socket Switch Device On and Off Directly

Posted by Cary on February 10 2014, 16:08pm

Categories: #tri-Frequency, #tri-Band, #GSM network, #remote control, #smart power socket, #SMS control, #telephone and manual control, #power-off memory function, #state checking function

This tri-frequency/tri-band GSM smart power socket has manual control, state checking function and power-off memory function other than phone call remote control and SMS remote control.

How to Use GSM Smart Power Socket Switch Device On and Off Directly

Manual Control

Press buttons SW1/SW2/SW3 on the socket directly to remote control the socket. Press SW1, socket 1 is socket 1 is power-on state. Press SW1 again, socket 1 is power-off state. Press SW2, socket 2 is power-on state. Press SW2 again, socket 2 is power-off state. Press SW3, socket 3 is power-on state. Press SW3 again, socket 3 is power-off state. When devices are plugged into sockets, only press buttons on the socket, you can switch on or off those devices.

CHECK command: Check the state of the socket

Edit text message “SN+ Six passwords +CHECK” and send to socket. You will receive the state of the socket. Then you will know the ON or OFF state of each socket.

Previous Next

How to Use GSM Smart Power Socket Switch Device On and Off Directly

Share this post

Comment on this post