/image%2F0270648%2F201212%2Fob_d86b0ff124ea29d4b7389ceb15584669_overblog-logo.jpg){kind=logo}
Question from customer:
I am in Australia and here we have Live-Re and Neutral-Black and Earth-Green. I wish to wire a drowned pump to your radio controller then back to the consumer mains.
Please advise if wiring would be
Mains Live Red to Controller Power Supply L
Neutral Black to Controller Power Supply N
Controller terminal A to Pump Live Red
Controller terminal B to Pump Neutral Black
What is the terminal C in the controller used for? How is the earth cable from the pump and the incoming power cable earth to be connected via the controller?
Answer:
We recommend you 1 channel 30amps remote controller kit (S1PU-AC220&C-2). This 1 channel 30A rf remote control kit operates in toggle, momentary and latched control mode (set the mode as you like freely). It is great for hard to reach electrical devices, remote distance is 100m. Control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage AC110~240V or DC0~28V.
The outputs of this receiver are relay outputs (the terminals are normally open and normally closed), they are not AC power outputs. It just amount to a switch to turn on or off device.
If you want to turn on / off the pump by this product, the connections are as following:
Live Red to Controller Power Supply L
Neutral Black to Controller Power Supply N
Live Red to Controller terminal B
Neutral Black to Pump Neutral Black
Controller terminal A to Pump Live Red
the earth cable from the pump to Earth – Green
Usage:
Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle: Press -> On; Press again -> Off.
Press button 1: Turn on the drowned pump
Press button 1 again: Turn off the drowned pump
Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold button 1: Turn on the drowned pump
Release button 1: Turn off the drowned pump
Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
Control mode Latched: Press -> On, other relays Off; Press another button -> Off.
Press button 1: Turn on the drowned pump
Press button 2: Turn off the submerged water pump
/http%3A%2F%2Fwww.creativeblindstoowoomba.com.au%2Fnew-site%2Fwp-content%2Fuploads%2FRoller-shutter-with-Red-stripes.jpg)
/image%2F0270648%2F20180523%2Fob_04d109_0012-roku-install-6c.jpg)
/https%3A%2F%2Fi.ytimg.com%2Fvi%2FtGld22Ls4dQ%2Fhqdefault.jpg)
/image%2F0270648%2F20180508%2Fob_815eff_garage-door-remote.jpg)
Comment on this post