Control 4 External Blinds by One Remote

Posted by Cary on March 1 2013, 16:49pm

Categories: #external blind, #blind motor, #motor remote control, #long range remote, #240vac, #magnetic antenna

Question:

I am wondering if you have a solution for multiple blind switches (4 external blinds) which operate on 240V. I would like to have a centralised remote system to control them open or close without going from one room to another. Can you suggest something as a solution? Thanks.

Answer:

You can order 4 receivers for motor remote control model of S1FC-AC220 (remember to choose operating voltage as 240V before you confirm the order); 4 external magnetic antennas 0020909, which are respectively installed to each receiver for longer remote distance; and one long range 1000m remote transmitter CB-4.

As you see in the picture of remote, button A can be set to control motor of blinds forward direction; button C can be set to control reversal direction. Buttons B and D can be set to stop the rotation.

Wiring diagram is as follow:

Connect live wire to terminal "L" and neutral wire to terminal "N". Then connect three wires of blind motor to terminals "UP", "COMMON" and "DOWN".